Green glow in the dark gummed tape

Usage and precautions.
1, should be on a flat surface construction, construction temperature should be 10~40℃.
2. The luminescent film can be cut into various shapes and directly attached to a certain place (such as telephone, switch, etc.) for decoration and indication.
3. Screen printing patterns, characters and other methods on the surface of the luminescent film to form a backing to emit light.
4. When sticking to the surface of an object, the surface of the object should be cleaned first, and there should be no oil stain or dust on the surface.
5. The luminescent film has certain thermal expansion and cold contraction, and the sliced luminescent film cannot be placed at will, so it should be clamped or pressed by heavy objects to prevent deformation and curling.
6. The size of the back paper of the adhesive-backed luminescent film is greatly affected by humidity. The sliced luminescent film should be processed in an environment with relative humidity of 40~60% to prevent curling.
7. When in use, remove the release paper on the back of the luminescent film, flatten the luminescent film with a certain pressure and stick it on the surface of the treated object, and pay attention to the good adhesion at the corners.
8. Different batches of the same type of luminescent film will have certain chromatic aberration.
9. There may be joints when the roll length of luminescent film exceeds 30M.